HNZXIB Lab Centrifuge Small General Purpose Device Laboratory Seperation

Introduction The 80-2 desktop electric centrifuge is a routine laboratory centrifuge, widely used in research, education and production departments of biology, medicine, and chemistry. The low-speed desktop electric centrifuge has a maximum speed of 4000r/min. It is used with radioimmunoassay to identify and separate cells and large particles. It is safer and has less noise with stainless steel liner User Manual 1. Place the hollow tube evenly before work, and run the machine at high speed for 1-2 minutes. Only when there is no abnormality can it work. 2. It is strictly forbidden to contact the rotating rotor. 3. It is strictly forbidden to run the rotor under unbalanced loading conditions. 4.wire or plug damage or electrical equipment failure, should be repaired by professionals, the use of non-factory recommended electrical equipment will cause certain quality problems. 5. Do not use in direct sunlight. 6. Do not place the unit near the high temperature heating element. 7. The rated parameters of the electrical outlets provided by the user should be greater than the rated parameters of the electrical appliances of the machine, and have good grounding measures. 8. It is strictly forbidden to move the machine while the machine is running. 9. This machine is strictly prohibited from strong impact. 10. When replacing the fuse, first remove the socket from the power supply. 11. When running, be sure to close the centrifuge cover to prevent objects from entering and damaging the machine. 12. Never let children approach the machine in use. 13. It is strictly forbidden to scrub with metal scrubbing and scrub with a soft cloth dipped in alkali.

• Stainless steel liner, Work capacity: 12 x 20ml
• Maximum speed: 4000rpm, Centrifugal force: 2325xg
• Timing range: 0-60min, Voltage: 110V/60HZ
• Outer Size: 31.5x28x28.5 mm, Weight: 8kg